Bower Beams Small 550x100

This pack contains a pair of small Bower Beams (550mm x 100mm) plus coach screws. Designed for joist and beam end repair they are quick and easy to use.

Instructions to Use:

1. Cut away the affected timber from 150mm up to 425mm from the joist end.
2. Offer up the two halves of the Bower Beams to the joist and slide forward into the socket. Temporarily secure with nails.
3. Drill the required number of pilot holes for the coach screws (not opposite each other).
4. Tighten down the coach screws. Note: a blocking piece will be necessary on large cut backs to fasten down the floor boards. Joist widths from 50mm up to 150mm can be replaced by this method.

Downloadable Datasheets