Alarm Signals/push notifications:
- Notification for mains AC power disconnected. This is a significant feature of our alarm. When the mains power supply for the alarm is taken from the pump power supply, in the event of pump power failure, an alarm notification is transmitted. The benefit of this is knowing in advance that the pump is not working before the water level reaches its critical point.
- Notification for mains AC power recovered. In the event that the power failure is short this can save time travelling to a call out. It has also proven to be an advantage when remotely monitoring a clients pumps. Clients often call out electricians who isolate the pump power supply without realising the potential problem. One phone call to the client can save an unnecessary call out.
- Alarm for float switch activation - with a dual pump chamber, fitting 2 float switches, 1 between the water level of both pumps plus a high level float switch provides early waring that the main pump has failed and the system is working on the back up pump, then the high level float for complete failure.
- Notification of low internal alarm battery power. Useful to know that there will shortly be no further alarms or notifications from the alarm.
- Notification low battery in float switch transmitter. If using the wireless transmitters for the float switch, no need to worry about the battery running out and not getting an alarm signal. The panel will send a notification that the battery status is low.
Product Installation:
- Separate instruction for Installers and End Users.
