Masonry Waterproofing

Filter

Search
Accepted Cards

Here to help01509 216 323

01509 216 323

Masonry Protection Cream / Brick Sealer - 20L

focus-masonry-cream-20l_240345420
focus-masonry-cream-20l_240345420focus-masonry-cream-20l2_1977602423focus-masonry-cream-20l3_649797324img_0239_1801347498

£ 324.00 (Inc VAT)
£ 270.00 (excl VAT)

+

Specifications



Size: 20 Litre
Coverage: 5m² per 1 litre
Penetration: Up to 10mm depending on substrate
Service life: Up to 20 Years
Appearance: Thick, white cream 
UK Delivery: £5.00 inc VAT

Focus Masonry Protection Cream is an incredibly effective brick sealer and rain repellent applied to walls. Just stand back and watch the water bead off on stormy days!

Supplied in 20L containers this product is incredibly economical.  In fact it's the the most effective protection we've found, performing as well as, if not better than, the leading brand name.  One tub will cover approximately 100m2.

This water based cream requires only a single coat application and can be applied by brush, roller or airless spray. 

Benefits:

  • Colourless
  • Waterproofs masonry 
  • Breathable
  • Water-repellent
  • Cost effective 

 

Preparation:


Focus Masonry Protection Cream should be applied to dry, porous surfaces. It should not be applied over sealed or painted surfaces and is intended for above ground use only.

Apply when rain is not forecast for the next 24 hours.


For the treatment to be successful it is necessary to check all joint and roof connections. Hairline cracks up to 0.3 mm can be ‘bridged’ by Focus Masonry Cream, however, it may be necessary to fill wider cracks in brick/stonework and repoint using a suitable cement or lime based mortar.
Dirty surfaces should be cleaned before the application of Focus Masonry Cream to the recommendations given in BS8221-1:2000, “Code of practice for cleaning and surface repair of buildings. Cleaning of natural stones, brick, terracotta and concrete.”


Remove any loose mortar, dust etc., using a masonry brush. 


Application to structures containing high levels of salt should be avoided.

Focus Masonry Cream has been formulated to be colourless once cured. Slight darkening may occur when it is applied to some substrates, which will usually fade over time. It is recommended that a small test area is treated before full application begins.

Application:


Apply by brush, roller or spray. Larger areas can be covered more quickly using roller application. Details such as around windows are best covered by brush. Care should be taken to ensure that Focus Masonry Cream does not splash onto glass, paintwork, plants, etc. Any splashes should be cleaned away with warm soapy water.


Focus Masonry Cream appears white immediately after treatment – making it easy to tell which areas have been treated. After 15 - 20 minutes from application, Focus Masonry Cream starts to penetrate into the masonry and the whiteness will fade. After 24 - 48 hours the wall will have returned to its original appearance.


As Focus Masonry Cream is formulated to penetrate into masonry it can take up to two months for a noticeable “beading effect” to appear when rainfall strikes the wall. The masonry will be resistant to light rain after 2 - 4 hours.

Downloadable Datasheets

PDF Focus Cream Datasheet PDF

Related products

£ 118.80 (Inc VAT)
£ 99.00 (excl VAT)
Stormdry Masonry Protection Cream 5L
£ 418.80 (Inc VAT)
£ 349.00 (excl VAT)
Stormdry Masonry Protection Cream 20L
Results 1 - 3 of 3

Need some advice? Call 01509 216 323

Follow Us On


Like us on FacebookFollow us on Twitter

Technical Support


Like Us

01509 216 323
This email address is being protected from spambots. You need JavaScript enabled to view it.

Delivery Info


Like Us

We offer next day
UK Delivery
(standard delivery £5.00)


Restoration UK Logo

Restoration UK Ltd
Unit 3, 18 Hanford Way
Loughborough, Leicestershire
LE11 1LS

01509 216323
This email address is being protected from spambots. You need JavaScript enabled to view it.