Typical Applications:
As a damp-proof membrane to isolate the wall finish from the damp wall where a meshed surface for plaster or render is not required.
The membrane creates a physical barrier between damp salt contaminated walls and clean dry internal surfaces. Newton 803 is typically used where the wall finish to the damp-proof membrane is timber battens, a dry-lining frame or block wall.
Newton 803 is 0.5mm thick and 3mm profile studs. By facing the studs to the wall this creates air flow channels that allow for vapour equalisation to take place between the membrane and the wall. Newton 803 is light, clean and easy to handle. It can be cut with a sharp knife, scissors or shears.
The membrane is inert and is highly resistant to water, alkalies, saline solutions and organic acids, and it is not affected by minerals. It is also resistant to bacteria, fungi and other small organisms.
Newton 803 is guaranteed against deterioration for 30 years, and has a life expectancy of at least 50 years (DIN 9001:2000) and is supported by BBA Certification Number 94/3010.
Recommended plugs: Newton Multi Plugs (approx 100 plugs per 2 x 20m roll) or Newton 800 Plugs.
Tapes: Single sided 75mm and 200mm tape