Find out how to stop condensation
The RUK Passive Air Vent is an environmentally friendly condensation control vent, designed to minimise if not eliminate condensation.
When room temperature and humidity are greater internally than externally, moist air is ventilated outside the building due to vapour air differences.
It requires no maintenance and has no moving parts.
- Stop Mould
- Stop Condensation
- Easy installation
- Fly screen on internal and external grill
- Over 15 years Proved Performance
- Anti-Draught vapour permeable membrane
- Maintenance-Free (no moving parts)
Read our guide to tackling condensation
The RUK Condensation Control Vent contains a vapour permeable membrane that allows vapour out the building without letting draughts come inside.
To install, use a 4.25" (107mm) core cutter and position the vent wherever condensation and/or mould are most prevalent. The thickness of the wall is unlikely to be an issue as the standard unit is supplied with a 13" long ventral core which will be appropriate for most properties. To stop any water ingress drill slightly downward.
In cases of severe condensation, a more advanced condensation control unit may be required to remedy the problem, however, installing the RUK Condensation Control Vent is a simple, cost-effective way to tackle most condensation problems and eliminate mould build ups.
We recommend using 1 x vent per 5m x 5m room. Core Diameter 10cm. Length of core 35cm
Please also see our Heat Recovery Unit
Call us for advice or call in to see one.
