A concentrated biocidal cleaner for use to clean areas contaminated with mould growth prior to the application of products such Antimould emulsion.
250ml of Mould wash concentrate will mix up to 5 litres of ready to use wash, which will treat an area of 30-40 m²
We recommend using this product for a complete mould eradication treatment.
Preparation
1. Prepare surfaces by removing non-washable and loose material, e.g. flaking
paint, grease, dirt, mould or wallpaper.
2. Make good any surface defects and rub down to a smooth finish.
Application
1. Dilute 1 part Mould Wash Concentrate with 19 parts water.
2. Wash down the prepared area with the diluted Mould Wash Concentrate
using a sponge, scrubbing brush or cloth.
3. Allow to dry thoroughly. Apply second wash in badly soiled areas and allow
to dry.
4. Prime any bare areas of plaster and woodwork with Antimould
Emulsion, thinned up to 10% with water if necessary.
5. Apply the appropriate Antimould or Anticondensation coating.
Product Information
Drying Time: 1- 4 hours normally.
Practical Coverage: 10 - 12m²/litre when diluted depending on the porosity and
roughness of the surface.
Application: By sponge, cloth or brush.
