Accepted Cards

Here to help01509 216 323

01509 216 323


Accepted Cards

Here to help01509 216 323

Download our free "A Homeowners Guide to Condensation in your Property"

How To Stop Condensation | Condensation Analysed

How To Stop Condensation | Condensation Analysed

How To Stop Condensation

Everyone has heard the term condensation and most of us have experienced it in our homes or work place at some time.

Condensation is not a new problem but our lifestyles today have changed and the problem has escalated. In the past we had open fires, draughty rooms, no fitted carpet and usually single glazing. Consequently our homes were colder and naturally ventilated.

In current times most homes have central heating, double glazing and fitted carpets. Occupants are often out all day, returning in the evenings to a cold house, switching on the heating and causing large fluctuations in the temperature of the property.

The external walls and windows are cold, the air inside is warmed and much moisture is created by the occupants washing, bathing, drying clothes, cooking etc. The moisture is usually suspended in the warm air but when the heating goes off the house quickly cools down and moisture in the air condenses on the coldest surfaces available.

CondensationThe moisture produced is clean pure water but it will readily support mould growth. The conditions for mould growth are:

  • A source of infection
  • Food
  • Water
  • Oxygen
  • Suitable temperature

Source of infection is always available the moulds have a wide tolerance of temperature 0-60°C and aeration levels always provide sufficient oxygen. Food requirements are minimal and are satisfied by normal levels of dust and deposits found even in the cleanest homes.

The susceptibility of materials in a dwelling to mould depends mainly on the moisture content. Different materials within a building adopt different equilibrium moisture contents under the same conditions of relative humidity. Individual species of fungi (mould) have different tolerances of different moisture contents.

CondensationConsequently there are always some moulds available that will grow in a building if the moisture levels are too high.

There are many technical facts and figures that we could quote to control relative humidity etc but the bottom line is to control condensation and subsequent mould growths, we need to:

  • Maintain a warm environment – Constant low heating is better than extreme hot and cold
  • Ventilation – It is essential to have air movement and in extreme cases extraction of overly moist air is necessary. We have several different types of ventilation systems for all kinds of situation.
  • Cleaning Mould growth –


1. Ventilate the room by opening doors and windows to encourage drying and disperse high concentration of spores which may exist.

2. Use a vacuum cleaner to remove spores from the surface

3. Dampen the growths with a 4:1 domestic bleach in water with a small amount of washing up liquid.

These walls should now be treated with a fungicidal wash such as Eco Biocide. The surfaces should now be left to dry out and keep under observation for a week or two as convenient. The walls can now be painted and we would suggest an anti-mould paint which will resist fungal infection for up to 5 years.


Recommended Products to Stop Condensation


You may also be interested to read:

Tackling Condensation & Mould

Analysing Condensation

Moisture Meters


For further advice or to purchase products to deal with your condensation problem please call: 01509 216323.

By accepting you will be accessing a service provided by a third-party external to

Need some advice? Call 01509 216 323

Follow Us On

Like us on FacebookFollow us on Twitter

Technical Support

Like Us

01509 216 323
This email address is being protected from spambots. You need JavaScript enabled to view it.

Delivery Info

Like Us

We offer next day
UK Delivery
(standard delivery £8.00 excl VAT)

Restoration UK Logo

Restoration UK Ltd
Unit 3, 18 Hanford Way
Loughborough, Leicestershire
LE11 1LS

01509 216323
This email address is being protected from spambots. You need JavaScript enabled to view it.