Waterproofing Tanking Slurry 25kg

Our unique cementitious tanking slurry is the ideal waterproofing solution where water pressure is encountered within building structures i.e. cellars, bunds and other below ground areas. It is also suitable in providing a waterproof damp proofing barrier where damp proof course treatment may not be possible. The product is made up of many components, which give high water resistance, flexibility, salt resistance, good adhesion and set control in a form that only requires water for mixing.

Our Tanking Slurry is a premixed formulation of plastic modified hydraulically setting powder. When mixed with water and SBR Bonding Agent it can be applied to a masonry substrate to form a monolithic bond, blocking the passage of water as well as becoming an integral part of the structure.

SBR Bonding Agent should be used as a primer between coats and diluted 3:1 in the gauging water. This will create a structural waterproofing system commonly referred to as tanking within the industry.

In certain circumstances we recommend the use of Salt Neutralisers where there is evidence of Salt contamination in the area to be tanked. Fillet Seal and Restor Set Rapid are also available for pressure areas where the wall meets the floor and where there is running or weeping water.Brush or spray application.25kg covers approximately 10 square metres with one coat. Supplied in plastic container suitable for mixing. Please see PDF for further info.