Restoration UK Online Shop

Cementitous Tanking Slurry System for brush or spray application. Can be used where water pressure is encountered within building structures such as cellars and other below ground areas.
For use above or below ground. 25kg covers approximately 10 square metres with one coat. Supplied in plastic container suitable for mixing. Please see PDF for further info.

Price: £50.00

PDF Download

Restoration UK's SBR is a full strength white styrene butadiene emulsion used to improve the properties of cement renders, screeds and mortars, improving flexural and adhesion and increasing tensile strength.

Supplied in 1 or 5 litre containers.

Price: £5.50

PDF Download

Vandex BB75 is a cementitious, efflorescence-free surface waterproofer (tanking slurry) with hydrophobic properties, resistant to water and moisture. 25kg covers approximately 10 square metres with one coat.Supplied in plastic container suitable for mixing

Price: £60.00

PDF Download

Chloride & Sulphate Salt Neutraliser can be used where there is evidence of Salt infestation. Apply with brush or coarse spray. Available in 5 Litre containers.

Price: £45.00

PDF Download

Restoration UK Fillet Seal is usually used where wall meets floor. This fast setting product gives added flexibility and water proofing qualities at vulnerable pressure points, including corners where wall meets floor. It can also be used for re-pointing or filling gaps prior to the first coat of Tanking Slurry. 1 x 25 kilo tub covers approximately 4-5 square metres.

Price: £71.00

PDF Download

Restor-Set Rapid is an instant cementitous plug to stop running water. It is also used to plug concrete panels, seal basements, concrete pipes, sewage systems, to fill cracks & build fillets. Supplied in 10kg Tubs. Restor-Set Rapid is used in situations where sealing against live water or grout movement is required.

Features
- Super fast curing
- Ideal for plugging water leaks in concrete pipes and below-ground situations

Price: £66.00

PDF Download

Rainpel External Masonry Water Repellent (25L) is a clear silicone masonry/brick water repellent for external surface treatment. Rainpel will penetrate the capillaries of porous masonry and line the capillary to prevent the ingress of water. Because the capillaries in the masonry are only ‘lined’ the masonry can readily breathe, thereby allowing normal vapour movement within the wall to carry on unhindered. Rainpel drys/evaporates to a clear finish. Supplied ready to use in a 25 Litre drum. Can be applied by brush, spray or roller.

Price: £72.00

PDF Download

Liquid Vapour Membrane (5L) is a water based ready to use waterproofing system supplied in black or white. Liquid Vapour Membrane has a consistency similar to thick emulsion paint. After application the product cures and forms a flexible membrane which is elastic, offers good bonding and is resistant to light and abrasion. Liquid Vapour Membrane can be applied to damp substrates by brush, roller, or spray. The applied product is typically touch-dry in one hour.

Price: £66.00

PDF Download

Mystolene PS is a plaster additive / salt inhibitor and is recommended for restoration plasterwork. When replastering with traditional products e.g. Lime, use Mystolene PS in a 6:1:1 mix. Mystolene PS has been proven over 30 years to be the only paraffin wax based render additive on the market, it allows the walls to breathe and dry without allowing the salts to pass. Mytstolene PS can also be added to Limelight Backing plaster.

Mystolene PS Plaster Additive is Packaged in a 5 litre container.

Price: £20.60

PDF Download

Super Floor Screed is a pre-packaged screeding mix based
on Portland and microsilica cements, an acrylic copolymer resin, specially graded basalt aggregates plus a blend of synergistic admixtures. Super
Screed is ready to use on site and when mixed with water produces a trowelable floor screed which is applied to new or existing concrete. The mix design which is polymer reinforced and enhanced with microsilica is readily mixed to produce a
screeding consistency that is easily applied and finished. The cured material develops high early
compressive and mechanical strengths producing a hard wearing, impact resistant floor.

Uses include:
- Topping of concrete and
cementitious floors, paths and
roadways
- Cover to concrete in car-parks,
forecourts, garages and petrol
stations.
- Loading bays and trucking aisles
in warehouses and factories.
- Areas of mechanical or chemical
attack, engineering and assembly
workshops food factories, farms,
dairies and breweries.

25kg bag covers approximately 1 sqm of surface area. Supplied in a plastic container.

Price: £31.00

PDF Download

Flexicoat (5Litre) is a special blend of rubber latex and bitumen emulsion suitable for use as a:-Waterproofer, Multi purpose adhesive, crack sealer. The rubber gives low temperature flexibility and resistance to softening in warm conditions. Please see PDF for further details.

Price: £19.00

PDF Download

Stormdry is a colourless, breathable, water-repellent treatment for brick, concrete and stone walls. It is supplied in the form of a deeply penetrating cream that is applied to the wall surface using a roller or brush. Once Stormdry has been applied to the wall surface, it will permeate deeply before curing to form a water-repellent barrier. Typical applications for Stormdry include:

•Protecting against penetrating damp (rain penetration)

•Improving the thermal resistance of masonry by keeping it dry (energy saving)

•Improving the performance of cavity wall insulation by protecting it from moisture

•Improving flood resistance of masonry.

Coverage: Approx 25 square metres per 5 Litre.

Sold in 5 Litre Containers.

Price: £120.00

PDF Download