SHOP HERE:

Waterproofing & Tanking Products

You are here: Restoration UK Home Page : Waterproofing & Tanking Products

Restor Tanking Slurry (25kg)

Cementitous Tanking System for brush or spray application. Can be used where water pressure is encountered within building structures such as cellars and other below ground areas.
For use above or below ground. 25kg covers approximately 10 square metres with one coat. Supplied in plastic container suitable for mixing. Please see PDF for further info.

Price: £50.00

PDF Download

Restor Tanking Slurry (25kg)
Quantity:
SBR Bonding Agent (1L or 5L)

Restoration UK's SBR is a full strength white styrene butadiene emulsion used to improve the properties of cement renders, screeds and mortars, improving flexural and adhesion and increasing tensile strength. Supplied in 1 or 5 litre containers.

Price: £5.50

PDF Download

SBR  Bonding Agent (1L or 5L)
Amount: :
Quantity:
Vandex BB75 Waterproofing Slurry 25kg

Vandex BB75 is a cementitious, efflorescence-free surface waterproofer (tanking slurry) with hydrophobic properties, resistant to water and moisture. 25kg covers approximately 10 square metres with one coat.Supplied in plastic container suitable for mixing

Price: £60.00

PDF Download

Vandex BB75 Waterproofing Slurry 25kg
Quantity:
Chloride & Sulphate Salt Neutraliser (5 Litre)

Chloride & Sulphate Salt Neutraliser can be used where there is evidence of Salt infestation. Apply with brush or coarse spray. Available in 5 Litre containers.

Price: £45.00

PDF Download

Chloride & Sulphate Salt Neutraliser (5 Litre)
Quantity:
Fillet Seal (25kg Tub)

Fillet Seal can be used where wall meets floor. This product gives added flexibility and water proofing qualities at vulnerable pressure points, including corners where wall meets wall. It can also be used for re-pointing or filling gaps before using Restor Tanking Mix.

1 25kg tub covers approximately 4-5 square metres.

Price: £71.00

PDF Download

Fillet Seal (25kg Tub)
Quantity:
Restor-Set Rapid (10kg tub)

Restor-Set Rapid is an instant cementitous plug to stop running water. It is also used to fill cracks, build fillets. Supplied in 10kg Tubs.

Price: £66.00

PDF Download

Restor-Set Rapid (10kg tub)
Quantity:
Rainpel Water Repellent (25 Litre)

Rainpel is a silicone masonry water repellent for external surface treatment. Rainpel will penetrate the capillaries of porous masonry and line the capillary to prevent the ingress of water. Because the capillaries in the masonry are only ‘lined’ the masonry can readily breathe, thereby allowing normal vapour movement within the wall to carry on unhindered. Supplied ready to use in a 25 Litre drum. Can be applied by brush, spray or roller.

Price: £70.00

PDF Download

Rainpel Water Repellent (25 Litre)
Quantity:
Liquid Vapour Membrane (5L)

LVM (Liquid Vapour Membrane) is a styrene butadiene based single pack, waterproofing system, supplied ready to use straight from the (5L) Tub. Designed for use under floors, in basements, on roofs and under tiles, providing a waterproof membrane giving high flexibility and good bonding. 5L covers 20 square metres (1 coat).

Price: £78.00

PDF Download

Liquid Vapour Membrane (5L)
Colour:
Quantity:
Mystolene PS (5L)

Mystolene PS is a plaster additive salt inhibitor and is recommended for restoration plasterwork where a 6:1:1 mix is used. Packaged in a 5 litre container.

Price: £20.60

PDF Download

Mystolene PS (5L)
Quantity:
Renderpel Plaster Additive (5L)

Salt Inhibitor/integral waterproofer

Price: £19.00

PDF Download

Renderpel Plaster Additive (5L)
Quantity:
Super Screed (25k)

Super Screed is a pre-packaged screeding mix based on Portland and microsilica cements, an acrylic co-polymer resin, specially graded basalt aggregates plus a blend of synergistic admixtures. Super Screed is ready to use on site and when mixed with water produces a trowelable floor screed which is applied to new or existing concrete. The mix design which is polymer reinforced and enhanced with microsilica is readily mixed to produce a screeding consistency that is easily applied and finished. The cured material develops high early compressive and mechanical strengths producing a hard wearing, impact resistant floor. 25kg bag covers approximatey 1 sqm of surface area. Supplied in a plastic container.

Price: £31.00

PDF Download

Super Screed (25k)
Quantity:
Flexicoat (5L)

Flexicoat is a special blend of rubber latex and bitumen emulsion suitable for use as a:-Waterproofer, Multi purpose adhesive, crack sealer. The rubber gives low temperature flexibility and resistance to softening in warm conditions. Please see PDF for further details.

Price: £19.00

PDF Download

Flexicoat (5L)
Quantity: