Damp Proofing, Waterproofing, Tanking & Wood Treatment Products
Restoration UK are pleased to offer a range of Damp Proofing Products to handle problems associated with rising damp, woodworm, condensation, penetrating damp. If you can not find the product you are looking for or need help with a specific problem please phone us on 01509 216323
Newton 805 Newlath is supplied on a 1.5m x 10m roll. Previously known as Newlath 2000, this product is a clear meshed waterproofing plaster membrane which will cover 15 square metres. Used to treat damp walls this product has a meshed surface which will allow you to plaster straight on to the membrane or dot and dab in conjunction with plasterboard. This membrane can be used in conjunction with Plaster plugs, Fleeceband and other plastic membrane butyl tapes. Supported by BBA Certification£88.00 (plus VAT)
RUK Universal Membrane Plugs complete with seal. 100 Plugs per bag. Ready sealed quick fix plugs for all membranes in all substrates. Suitable for use above or below ground. These plugs come complete with a seal, this ensures that no damp can penetrate through the fixings when membrane is being used below ground level. Use a 10mm drill bit to give secure fix. Use a large head hammer to gently drive the plug into pre-drilled hole making certain that a good even seal is achieved.Length 55mm. Diameter of head 25mm£31.00 (plus VAT)
Restor 39 is a water dispersible, epoxy floor coating and sealer. It is an odourless sealer coat for use on cementitious surfaces, to provide a dust-proof, easily cleaned surface. Once cured it is resistant to penetration by liquids, including oil, petrol and mild chemicals.
It is suitable for areas of pedestrian and light traffic including outside patios, garage floors, cellar floors (and walls).
Restor 39 is a two component, water dispersible epoxy resin system, which when mixed forms a hard, flexible and semi-matt seal to concrete and other substances.
Available in two sizes: 2.5L (£58.00) and 5L (£110.00). Please use the drop down list to select a size.
Coverage: A 2.5L pack will cover 20 - 25 square metres. A '5' pack will cover approximately 40 - 50 square metres, this figure will depend upon the porosity of the substrate. Cure Time: The coating will accept light foot traffic after 24 hrs and is fully cured after 7 days.£58.00 (plus VAT)