Search results for 'liquid-waterproofing-membrane-damp-proofing-paint'

Cementitous Tanking Slurry System for brush or spray application. Can be used where water pressure is encountered within building structures such as cellars and other below ground areas. For use above or below ground. 25kg covers approximately 10 square metres with one coat. Supplied in plastic container suitable for mixing. Please see PDF for further info.

Oldroyd Xv Clear is a semi-transparent, studded cavity drainage membrane manufactured from polypropylene.

Supplied in a 2m x 20m Roll.

Flexicoat (25 Litre) is a special waterproof brush on system blended of rubber latex and bitumen emulsion suitable for use as a: Waterproofer, Multi purpose adhesive, crack sealer. The rubber gives low temperature flexibility and resistance to softening in warm conditions. Coverage from a 25L container: 50 - 60 square metres. Please see PDF for further details.

Oldroyd Xs is supplied in a 2m x 20m roll and is a tough polypropylene cavity drainage membrane embossed with an "X" pattern of grooves.

These grooves allow moisture to move behind the membrane and allow for shrinkage movement when screeds are laid on top.

The most common application for Oldroyd Xs is to lay it on top of damp concrete floors or newly laid floor slabs.

A wide choice of flooring types can then be laid on top, for example, screeds, particle board, and laminated wooden flooring. Insulation can also be used in conjunction with the system, where required.

FREE POSTAGE & PACKING ON ALL DRYZONE ORDERS!!

Price Breaks:

• 1 - 5 Dryzone Tubes £20.00 each + Vat
• 6 - 10 Dryzone Tubes £19.00 each + Vat
• 11 - 20 Dryzone Tubes £18.00 each + Vat

Dryzone is a special silicone based damp proofing injection cream to treat rising damp. It is simply introduced along the mortar course at regular intervals by injecting it into pre-drilled holes. Use in conjunction with our Dryzone Applicator Gun.

PDF Download

Restoration UK Membrane Fixing Plugs come in a box of 200 and are complete with a rubber seal; used to fix cavity drainage membrane (e.g. Plastofol Membrane) to concrete, stone and brick. Use an 11mm drill bit to give a secure fix. Use a large head hammer to gently drive the plug into the pre-drilled hole, making certain that a good even seal is achieved.

These plugs come complete with a seal, this ensures that no damp can penetrate through the fixings when membrane is being used below ground level

Length 70mm. Diameter of head 30mm.

Not suitable for use with plaster membrane.

Low pressure injection unit for the injection of 5L Focus Damp Proofing cream into pre drilled holes. Complete with Brass lance. This unit can also be used as a woodworm sprayer or for garden use.

2m x 10m Roll

Our Plastofol Plaster membrane is 10m in length which makes it an easy to handle lighter roll.

The opaque colouring of the roll makes it easier to work with and it is also a more robust membrane. It has a special mesh attached to one side which can be fixed to damp, contaminated walls using Oldroyd P Plaster Membrane Fixing Plugs.

This version of Plaster Membrane is stronger with a 7mm stud. The mesh can be plastered allowing a dry plaster finish. It can also be used externally for protection against penetrating damp.

Our Dryzone Damp Proofing Applicator Gun includes a brass nozzle which makes it long lasting and hardwearing. This Dryzone Applicator Gun is used to install Dryzone Damp Proofing Injection Cream to create a damp proof course to treat rising damp.

PDF Download

Once cured, Vandex BB75 tanking slurry forms a waterproof coating (tested up to 7 bar). It can be employed against active and passive water pressures, and is approved for use in contact with potable water. The initial and final bonding capability of Vandex BB75 is excellent, making it suitable for application to horizontal as well as vertical surfaces. It is durable, resistant to frost and heat afer setting, whilst remaining vapour-permeable.

Delta PT Plaster Plugs can be used in conjunction with any plaster membrane to fix the membrane to the wall/substrate.

Size: 8mm x 52mm. Box of 250.

Use an 8mm drill bit.

These plugs do not have a seal. If you wish to create a seal, please purchase the butyl rope (as seen in related products), this can wrapped around each plug to create a reliable seal.

Restoration UK Fillet Seal is usually used where wall meets floor. This fast setting product gives added flexibility and water proofing qualities at vulnerable pressure points, including corners where wall meets floor. It can also be used for re-pointing or filling gaps prior to the first coat of Tanking Slurry. 1 x 25 kilo tub covers approximately 4-5 square metres.